OKX Wallet extension

*USB disk startup is OKX Wallet extensionone of the common steps to install Win7 now. This method is more convenient than the previous method that required CD-ROM startup, saves the cost of CD-ROM and optical drive, and quickly and efficiently completes the installation of the win7 system. Pretend. Next, let's introduce in detail how to use the USB flash drive to boot and install the win7 system. I. Preparation 1. A computer or laptop is required; 2. A USB flash drive with a capacity of not less than 4GB to ensure availability and compatibility; 3. THE WIN7 SYSTEM INSTALLATION FILE CAN BE THE IMAGE FILE IN THE CD OR THE DOWNLOADED ISO FILE; 4. Software Rufus, download address: https://rufus.ie/en_US/;5. The initial installation of Win7 may require some hardware drivers. It is recommended to download the corresponding drivers in advance. II. USB disk production Win7 boot disk 1. Download and install the Rufus tool, and then insert the prepared USB flash drive. Two. Open Rufus, click on the device (device, partition, file system) column, and then select the USB flash drive you inserted; 3. Add the Win7 system installation file to Rufus, click the "Select" button below, and find the Win7 system image file you have prepared in advance; 4. The most critical step of the USB boot disk is the partition setting. It is recommended to select the "NTFS" mode in the "File System" column to ensure that it supports single files larger than 4GB, and set "Device Startup Type" to "MBR Partition Scheme"; 5.Other options can be set by default. Click the "Start" button below to start making a USB boot disk. 6. This process may take a few minutes, depending on the capacity of the USB flash drive. After completion, the USB flash drive can be used for the installation of Win7. III. Start the USB flash drive and insert the made USB flash drive. In the computer you are using, you need to press "F2", "F10", "F12", etc. to enter the computer BIOS settings when booting, and select the USB disk startup option in "Bootup Options". At this time, the computer will find the operating system in the USB flash drive and start it. IV. Install Win71. Enter the Win7 system installation wizard, and according to the prompt language and shortcut keys and other settings, when you reach the "installation type" link, it is recommended to select the "custom (advanced)" mode. Two. The installation interface will show the hard disk and partition you have connected. Choose one of them to install the Win7 system.3. Select the free partition for installation, enter the relevant information, and then click "Next" to enter the most important installation process. Four. After the installation of Win7 is completed, remove the USB boot disk, and then follow the prompts to complete the subsequent settings. V. Conclusion Through the above steps, you have successfully installed the Win7 system. The USB boot disk saves us a lot of CDs and the cost of optical drives, and its production is quite convenient and fast. I believe that it will be used more and more in the future. This series of steps may take a little time and effort for friends who have not installed the Win7 system, but after familiarizing themselves with each step, it is actually not so difficult to boot and install WIN7 on the USB flash drive.

Contact Us
Phone：020-83484616